Normally, compressors produce large amounts of condensate that is contaminated with oil. This liquid cannot be disposed untreated by law into the sewage system or the environment. SCC offers the OWS series of oil water separators that remove oil contaminants from the condensate so reliably that the water contains no more than 20 mg / l of hydrocarbons and can therefore be disposed of in the sewage system.
Oil Water Separator
Your advantages with OIL WATER SEPERATORS Compressor
Synthetic compressor oils
High performance, also works for new synthetic oils for compressors which cannot be separated from condensate by traditional ways, such as decantation.
Easy maintenance
Simplified maintenance and consequent reduction of maintenance costs.
Lower oil concentration
Lower concentration of oil, less than 10 ppm/l or lower (by a regular replacement of bags).
Compactness
Compact dimensions and easy installation.
TWIN Concept
TWIN Solution, the only separator which can work with two or more separators.
Sustainability
Ecological and user-friendly material.
Flexibility
Depressurisation chamber is removable and directable to allow front or rear connection to drain for an easy installation.
Activated carbon filter
Depressurisation chamber containing an activated carbon filter to avoid atmospheric contamination.
Reliability
Heavy-duty Monobloc plastic tank to avoid any leakage
TWIN Concept
With our unique TWIN system you have the possibility to double or triple the quantity of treated condensate or to improve the quality of drain water. You can expand the system at any time, not only during the first installation. The separator that can work as single or double column.
Operation principal:
- The condensate flows into the separator through a lid depressurisation chamber (LD)
- Then condensate filters down into the separator tank (BD) through the hole in the lid (LD)
- The prefilter (PF) and activated carbon bags (CF) purify the condensate from oil and solid particles
- After this process, the condensate can be drained in sewers or can be treated in compliance with the national law
Data refer to the following nominal conditions:
- ambient temperature: +25°C
- inlet air pressure: 7 bar(g)
Consider oversizing the separators if ambient temperature and humidity are higher than nominal ones. Nominal data considered for screw compressors.
Model Overview
Performance data according to ISO 1217, Annexe C
Technical changes and errors are subject to change
